Boom Lift Online Training
Online knowledge training for construction workers who operate extensible and articulating boom platforms — hazard recognition, pre-use inspection, load limits, fall protection, and safe operation under 29 CFR 1926.453 and ANSI standards.
- Unlimited exam retakes
- Mobile access on any device
- Certificate of Completion available immediately online after passing
- Group and business enrollment available
Safe Boom Lift Operation for Construction
Boom lifts give access to elevated work but carry serious fall, electrocution, and structural hazards. This course covers the knowledge construction workers need to recognize those hazards and follow safe procedures.
Boom Lift Components and Controls
Parts of a boom lift, how controls work, reading load limits, and what keeps the lift stable.
Pre-Use Inspections and Testing
Daily control testing, and inspecting the boom, outriggers, and critical components before operating.
Safe Setup and Operation
Solid ground, correct outriggers, standing safely in the platform, load limits, and when you may move the lift with the boom elevated.
Fall Protection and Electrical Hazards
Body belts and lanyards done right, why climbers must not be worn, and protecting insulated components.
Construction Workers Who Operate Boom Lifts
For construction employees who operate or will operate extensible or articulating boom platforms on job sites.
Tasks that require elevated access using boom lifts.
Maintenance, repair, or installation from boom platforms.
Reaching overhead electrical work areas.
Building exteriors and high surfaces.
Rooftop and elevated HVAC equipment.
Ensuring safe boom lift use on site.
Training Based on Federal OSHA Standards
Only authorized persons may operate aerial lifts in construction. Under 29 CFR 1926.453 and 1926.454, employers must train boom lift operators in hazard recognition, proper operation, fall protection, inspection procedures, and manufacturer requirements. This course is the knowledge portion of that training. Based on federal OSHA; State Plans may have additional requirements.
Important: employers must also provide site-specific and equipment-specific training, verify proficiency, and authorize each operator.
Federal OSHA 29 CFR 1926.453 & 1926.454
The aerial lift standard and its training requirements for construction.
Mobile and Online Access
Any device, any location, at your own pace.
Unlimited Exam Retakes
Retake the assessment as many times as needed.
Instant Certificate of Completion
Available online immediately after you pass.
What the Online Course Does Not Replace
Federal OSHA requires employers to provide more than online training alone.
What This Online Course Provides
- Hazard recognition — electrical, fall, struck-by, and falling object hazards
- Controls, load limits, pre-use control testing, and equipment inspections
- Setup, positioning, stability, and fall protection requirements
- Operating rules, manufacturer requirements, and field modifications
- Unlimited-retake final assessment and an immediate Certificate of Completion
What the Employer Must Still Provide
- Site-specific and equipment-specific training on your hazards, terrain, overhead obstacles, and the exact boom lift model
- Verification that you can safely operate the lift before you are assigned to it
- Formal authorization — only your employer can authorize you to operate an aerial lift
- Retraining when hazards change, you switch lift types, an incident occurs, or proficiency is lacking
The Certificate of Completion is not an OSHA certification and is not employer authorization to operate.
Trusted by safety professionals.
“The pre-use inspection and load limit lessons were straight to the point. I run through them before I raise the platform every time.”
Questions, answered.
Not sure this is the right course for you or your team? Reach out to our team.
Reach OutBoom Lift Training Online in 45 Minutes.
Learn to recognize hazards, inspect and set up your equipment, and operate boom lifts safely — instant access, unlimited retakes, immediate certificate.
