29 CFR 1926 Subpart CC

Cranes and Rigging Safety Training (Construction)

Construction crane fundamentals for operators and crews: prevent struck-by, crushing, electrocution, and equipment-failure hazards under 29 CFR 1926 Subpart CC.

Individual Enrollment
$79.99one-time
Course Length
2 Hours
  • Unlimited exam retakes
  • Mobile access on any device
  • Certificate available immediately after passing
  • Group and business enrollment available
  • 6 downloadable employer handouts
Group / Business Enrollment
Online & Mobile Friendly
2-Hour Course
Construction Crane Safety
29 CFR 1926 Subpart CC
Unlimited Exam Retakes
Instant Certificate
Course Overview

Construction Crane Safety Fundamentals

Tip-overs, structural failures, power lines, suspended loads, and assembly/disassembly can cause fatal injuries. Learn the controls that protect crane operators and nearby crews.

This fundamentals course supports employer training obligations with knowledge of construction crane operation, inspection, maintenance, and personnel requirements.

Ground Conditions and Assembly

Firm, drained, graded ground must meet manufacturer support and levelness specifications. Cover preparation, assembly/disassembly directors, crew briefings, and setup/teardown protection.

Power Lines and Work Area Control

Overhead and underground power line hazards during setup, assembly, and operation; minimum clearances, protective measures, fall protection, and keeping workers clear of loads and swing radius.

Inspections and Maintenance

Shift, monthly, and annual inspections; wire rope defects and removal from service; safety devices, operational aids, rope selection/installation, modifications, maintenance, and documentation.

Operations, Signals, and Rigging

Capacity limits, load charts, setup/leveling, boom/load control, operator stop-work authority, hand/voice/radio signals, operator and signal person qualifications, rigging, personnel hoisting, and multiple-crane lifts.

Who This Course Is For

Construction Crane Operators and Crews

For workers and supervisors involved in or exposed to construction crane operations. Job duties, employer rules, and state requirements affect training needs.

Crane Operators

Operators learning federal construction crane fundamentals.

Signal Persons

Workers directing lifts with hand, voice, or radio signals.

Rigging Crew Members

Personnel hooking, unhooking, or guiding loads.

Assembly/Disassembly Crews

Workers setting up, configuring, or dismantling cranes.

Construction Supervisors

Foremen and supervisors overseeing crane operations.

Safety Personnel

Managers and coordinators responsible for crane safety programs.

Federal OSHA Standards and Training

Training Based on Federal Requirements

Subpart CC covers construction crane inspections, personnel qualifications, assembly/disassembly, power lines, and work area control. This course provides supplemental knowledge, not complete compliance.

Important: this course does not certify/license operators, qualify signal persons, or designate competent/qualified persons. Employers must fulfill all role-specific and workplace requirements.

29 CFR 1926 Subpart CC

Cranes and derricks used in construction, including mobile cranes, boom trucks, and similar equipment.

Operator Requirements

Operators must be trained, certified/licensed, AND evaluated before operating covered equipment (§1926.1427).

Signal Person Requirements

Before signaling, personnel must qualify through oral/written and practical tests assessed by a qualified evaluator (§1926.1428).

Performance-Based Retraining

No fixed interval: refresher training is required when employee conduct or knowledge evaluations show it is needed.

Understanding Employer Responsibilities

What This Course Provides vs. What Employers Must Still Do

Knowledge training supports employer obligations; it does not replace qualifications, practical evaluations, or site-specific safety programs.

What This Online Course Provides

  • Foundational knowledge of ground conditions, assembly/disassembly, inspections, power lines, operations, signals, operator/signal person requirements, and rigging safety
  • Six downloadable employer handouts: monthly/annual equipment and wire rope inspection logs, assembly/disassembly crew briefing checklist, and ground conditions communication form
  • Immediate online Certificate of Completion documenting successful completion of this fundamentals course
  • Self-paced access on any device, unlimited exam retakes at no extra cost, and group/business enrollment options

What the Employer Must Still Provide

  • Establish, effectively communicate to relevant personnel, and enforce work rules for actions required by Subpart CC
  • Ensure operators are trained and certified/licensed; a knowledgeable, trained, experienced evaluator must assess assigned equipment/tasks and workplace conditions, with documented completion — certification alone is insufficient
  • Ensure signal persons pass oral/written and practical tests before signaling, assessed by a third-party or employer qualified evaluator
  • Competent-person visual inspection before each shift; documented monthly inspections (retain 3 months); qualified-person annual/comprehensive inspections at least every 12 months (retain records at least 12 months)
  • Assembly/disassembly directed by someone both competent and qualified, or a competent person assisted by qualified persons
  • Controlling entity/contractor ensures sufficient ground improvements for assembly and use; designate competent/qualified persons, maintain equipment, enforce safe practices, and provide site-specific procedures and power line clearance controls
  • Provide role-specific hands-on training, practical evaluation, and experience; refresher training when conduct or knowledge evaluations indicate a need; verify additional State Plan requirements
What Our Customers Say

Trusted by safety professionals.

“The course broke down confined space responsibilities clearly and gave me more confidence reviewing entry conditions with our team.”
Derek H.
Plant Supervisor · Houston, TX
Frequently Asked Questions

Questions, answered.

Still unsure if this course is right for you or your team? Reach out to our team.

Reach Out
No. It provides foundational knowledge, not operator certification/licensing. Employers must ensure training, certification/licensing through an accredited testing organization, government entity, audited employer program, or military qualification, plus evaluation on the specific equipment operated.
Start Your Training Today

Cranes and Rigging Safety Fundamentals.

Build essential construction crane safety knowledge to support your employer’s training program. Enroll individually or train your crew with group enrollment.

$79.99
2 Hours · Instant online access