Based on 29 CFR 1926.453 & 1926.454

Aerial Lift (MEWP) Supervisor Online Training

For construction supervisors overseeing aerial lift operations — authorizing workers, verifying daily inspections, and enforcing safe jobsite practices under 29 CFR 1926.453 and 1926.454.

Individual Enrollment
$79.99one-time
Course Length
1 hr
  • Unlimited exam retakes
  • Mobile access on any device
  • Certificate of Completion available immediately online after passing
  • Group and business enrollment available
Group / Business Enrollment
Online Training
1 Hour Course
Construction Supervisors
29 CFR 1926.453/454
Unlimited Exam Retakes
Instant Certificate
Course Overview

Supervise Aerial Lift Operations with Confidence

Aerial lifts — boom lifts, bucket trucks, and articulating platforms — present serious fall, electrocution, and crush hazards. Supervisors must ensure workers are trained and authorized, equipment is inspected daily, and safe procedures are followed. This course covers the federal OSHA requirements in 29 CFR 1926.453 and 1926.454 for supervisors overseeing MEWP operations in construction.

Supervisor Responsibilities and Worker Authorization

Ensuring only trained and authorized workers operate aerial lifts, evaluating readiness, and knowing when retraining is required.

Daily Inspections and Pre-Use Control Tests

The required daily inspection process, testing lift controls before every shift, and recognizing defects that must be fixed before use.

Safe Operating Procedures and Load Limits

Platform rules, load capacity, fall protection mandates, and the prohibited practices you must enforce to prevent incidents.

Electrical Hazards and Environmental Limits

Minimum power line clearances, weather conditions that make lift use unsafe, and when operations must stop.

Who This Course Is For

Construction Professionals Responsible for Aerial Lift Safety

For construction supervisors, foremen, safety coordinators, and project managers who oversee workers using aerial lifts or mobile elevating work platforms (MEWPs) on construction sites.

Construction Foremen

Supervisors directing crews working from boom lifts or aerial platforms.

Project Managers

Managers responsible for OSHA compliance on jobsites using aerial equipment.

Safety Coordinators

Safety personnel overseeing aerial lift operations and worker training programs.

Site Superintendents

Supervisors with overall responsibility for site safety and equipment use.

General Contractors

Contractors supervising subcontractors using aerial lifts on multi-trade projects.

Maintenance Supervisors

Supervisors overseeing facility maintenance crews who use aerial lifts for building work.

OSHA Requirements and Compliance

Online Knowledge Training for Supervisors

Federal OSHA construction standards require that employees who work on or operate aerial lifts be trained on the associated hazards and the procedures to control them — and supervisors ensure workers are properly trained, authorized, and supervised. This course provides the knowledge portion of the training required under 29 CFR 1926.454 for supervisors overseeing aerial lift use in construction. Based on federal OSHA; State Plans may have additional requirements.

Important: your employer must still provide equipment-specific instruction, site-specific hazard training, and proficiency verification — and must formally authorize workers to operate aerial lifts and, if applicable, designate competent persons under 29 CFR 1926.450(b).

Federal OSHA 29 CFR 1926.453 & 1926.454

The aerial lift standard and its training requirements for construction worksites.

Mobile and Online Access

Any device, any location, at your own pace.

Unlimited Exam Retakes

Retake the assessment as many times as needed at no extra cost.

Instant Certificate of Completion

Available online immediately after you pass.

Employer Responsibilities

What the Online Course Does Not Replace

Federal OSHA standards require more than online knowledge training alone. After you complete this course, your employer is responsible for the items on the right.

What This Online Course Provides

  • Supervisor responsibilities for authorizing workers and overseeing aerial lift operations
  • Daily pre-use inspections, control tests, and recognizing equipment defects
  • Safe operating procedures, load limits, fall protection, and electrical clearances
  • Six employer handouts: Daily Pre-Use Inspection & Control Test Log, Authorized Operator Designation Form, Training Records (Users and Erecting/Moving/Inspecting/Maintaining), Competent Person Designation Form, and Worksite Hazard Assessment
  • Unlimited-retake final assessment and an immediate Certificate of Completion

What the Employer Must Still Provide

  • Equipment-specific and manufacturer training on the exact make and model used at your worksite
  • Site-specific hazard training on terrain, overhead obstructions, power lines, and environmental factors
  • Hands-on evaluation ensuring you can demonstrate the knowledge and skills to supervise aerial lift operations
  • Formal authorization of workers to operate aerial lifts and, when applicable, competent person designation under 29 CFR 1926.450(b)
  • Ongoing daily pre-use inspections and control tests required by 29 CFR 1926.453(b)(2)(i) before each shift
  • Retraining whenever worksite hazards change, different equipment is used, an incident occurs, or a worker shows a lack of proficiency

The Certificate of Completion is not an OSHA certification, does not create authorization to operate equipment, and does not create competent person status.

What Our Customers Say

Trusted by safety professionals.

“The authorization and daily inspection sections mapped exactly to what I enforce on site. My whole supervisory crew went through it.”
Marcus B.
Site Superintendent · Phoenix, AZ
Frequently Asked Questions

Questions, answered.

Not sure this is the right course for you or your team? Reach out to our team.

Reach Out
It provides the online knowledge portion of the training required under 29 CFR 1926.453 and 1926.454 for supervisors overseeing aerial lift operations in construction. Your employer must also provide equipment-specific and site-specific hazard training, verify your proficiency, formally authorize workers to operate aerial lifts, and, if applicable, designate you as a competent person.
Start Your Training Today

Aerial Lift Supervisor Training Online in 1 Hour.

Equip yourself with the knowledge to supervise aerial lift operations safely and in compliance with federal OSHA construction standards — instant access, unlimited retakes, immediate certificate.

$79.99
1 hour · Instant online access