29 CFR 1910.179 / 1926.1438

Overhead Crane Online Training

Learn to operate overhead and gantry cranes safely — crane components, safety systems, inspections, and safe load handling based on federal OSHA standards for construction and general industry.

Individual Enrollment
$79.99one-time
Course Length
1 hr 30 min
  • Unlimited exam retakes
  • Mobile access on any device
  • Certificate available immediately after passing
  • Group and business enrollment available
Group / Business Enrollment
100% Online Training
1 hr 30 min Completion
Construction & General Industry
29 CFR 1910.179 / 1926.1438
Unlimited Exam Retakes
Instant Certificate
Course Overview

Know Your Equipment Before You Lift

Overhead and gantry cranes move heavy loads through facilities every day. Operating them safely means understanding how the crane works, what its safety systems do, and how to recognize hazards before they cause injuries or damage.

This course covers bridge and trolley systems, hoists and brakes, load handling, and inspection requirements based on 29 CFR 1910.179 and 1926.1438.

Crane Components and Controls

Understand bridge, trolley, runway, hoist, hook, and load block structure — and how controllers operate the crane safely.

Brakes and Safety Systems

Learn holding brakes, brake testing, limit switches, overtravel protection, and bumpers that keep operations safe.

Safe Load Handling

Determine rated load, attach loads correctly, lift and move without swinging, and know what you cannot do with a crane.

Inspection and Maintenance

Recognize wire rope defects, hoist chain damage, and hook discard criteria, plus frequent and periodic inspection requirements.

Who This Course Is For

Operators and Workers Using Overhead and Gantry Cranes

Relevant to workers who operate or work around overhead and gantry cranes in construction, manufacturing, warehousing, and industrial facilities.

Manufacturing Equipment Operators

Workers operating overhead cranes to move materials, parts, and products through production facilities.

Warehouse Material Handlers

Personnel using gantry cranes to load, unload, and position heavy materials in storage and distribution centers.

Maintenance Technicians

Skilled trades workers who inspect, maintain, and repair overhead crane systems and components.

Construction Workers

Workers operating or assisting with overhead and gantry crane operations on construction projects.

Fabrication Shop Personnel

Employees in metal fabrication, welding, and assembly facilities who use overhead cranes daily.

Supervisors and Safety Personnel

Foremen, supervisors, and safety coordinators responsible for overhead crane operations and workplace safety.

Federal OSHA Standards and Training

Training Based on Federal Requirements

This course is based on 29 CFR 1910.179 (General Industry) and 1926.1438 (Construction), which require that only designated personnel operate overhead and gantry cranes.

Important: the employer is responsible for designating crane operators as qualified. This course provides the knowledge training that supports that decision; employers should add workplace-specific instruction and an evaluation of the operator's ability to safely operate the actual crane.

29 CFR 1910.179 / 1926.1438

Federal OSHA's overhead and gantry crane requirements for general industry and construction. Construction standard 1926.1438 incorporates 1910.179.

Designated Personnel Only

Only employers may designate crane operators as qualified to perform specific duties (1910.179(a)(35) and (b)(8)) — designation is an employer decision.

No Fixed Retraining Interval

The standards set no fixed refresher schedule. Employers determine when retraining is needed based on conditions, duties, and performance.

Knowledge Training Component

This course is the knowledge portion that supports an employer's designation decision — it does not by itself qualify anyone to operate a crane.

Understanding Employer Responsibilities

What This Course Provides vs. What Employers Must Still Do

Online training builds knowledge, but employers hold additional responsibilities under federal OSHA standards.

What This Online Course Provides

  • Knowledge training based on 29 CFR 1910.179 (General Industry) and 1926.1438 (Construction)
  • Crane components, brakes, and safety system operation and testing procedures
  • Rated load determination and safe load handling practices
  • Wire rope, chain, and hook inspection criteria, plus frequent and periodic inspection requirements
  • Instant Certificate of Completion, unlimited exam retakes, and mobile access

What the Employer Must Still Provide

  • Designation of crane operators as qualified — completing this course does not automatically make someone designated personnel
  • Workplace-specific instruction on the actual crane, its controls, rated capacity, hazards, and site-specific procedures
  • Practical evaluation of the operator's ability to safely operate the actual crane in the work environment
  • Crane inspection and maintenance programs, including frequent and periodic inspections with required certification records for hooks, chains, and wire ropes
What Our Customers Say

Trusted by safety professionals.

“Clear coverage of inspection criteria our team deals with daily. Exactly what we needed.”
Marcus D.
Production Supervisor · Grand Rapids, MI
Frequently Asked Questions

Questions, answered.

Still unsure if this course is right for you or your team? Reach out to our team.

Reach Out
Overhead and gantry crane components, brakes and safety systems, safe load handling, wire rope and chain inspection, hook inspection criteria, and frequent and periodic inspection requirements, based on 29 CFR 1910.179 and 1926.1438.
Start Your Training Today

Operate Overhead and Gantry Cranes Safely.

Gain the knowledge to inspect cranes, test safety systems, and handle loads safely under federal OSHA standards. Training multiple employees? Group enrollment makes it easy to train your entire crew.

$79.99
1 hr 30 min · Instant online access