Rigger & Signal Person Training (Level 2)
Online training on rigging fundamentals, load calculations, sling selection, wire and fiber rope, rigging hardware, and standard hand signals — the knowledge foundation for signal person qualification and qualified rigger determination under 29 CFR 1926 Subpart CC.
- Unlimited exam retakes
- Mobile access on any device
- Certificate available immediately after passing
- Group and business enrollment available
- 5 employer handouts included
Learn the Fundamentals of Safe Rigging and Crane Signaling
Subpart CC requires signal persons to be qualified and riggers to meet qualified-person criteria for specified tasks. This course teaches the technical knowledge that supports those determinations.
You’ll learn to select and inspect rigging, calculate load weights and sling angles, understand rope construction, tie essential knots and splices, and use standard hand signals.
Rigging Equipment & Hardware
Chains, hooks, shackles, wire rope clips, slings, and other hardware — how to inspect each and recognize when it must be removed from service.
Load Calculations & Sling Selection
Estimating load weight, finding the center of gravity, how sling angle affects stress, and selecting the right sling type and capacity.
Wire Rope & Fiber Rope
Rope construction, measurement, safe working capacity, handling and storage, inspection criteria, and damage recognition.
Knots, Splices & Attachments
Basic rigging knots, fiber rope splices, wire rope eye splices, and proper use of wire rope clips, clamps, and sockets.
Rigging & Signal Training for Construction Workers
For construction workers who need rigging and signaling knowledge.
Workers seeking signal person qualification under Subpart CC who need hand signals and crane operation basics.
Workers performing rigging who need load calculation, sling selection, and inspection knowledge.
Operators who want to understand rigging principles and standard hand signals for better job communication.
Supervisors of crane operations who need to understand rigging safety and signal person requirements.
Workers in steel erection, assembly/disassembly, or other tasks requiring rigging knowledge.
Operators of cranes, hoists, or other lifting equipment who need rigging and signaling training.
Online Knowledge Training for Subpart CC Compliance
Subpart CC sets specific requirements for signal persons and qualified riggers. This course provides the technical knowledge foundation; qualification, assessment, and job-specific determination remain employer responsibilities.
Important: signal persons must also pass a practical test assessed by a qualified evaluator before working as a signal person, and qualified rigger status is determined by your employer for the specific job and equipment.
Federal OSHA Subpart CC
Based on 29 CFR 1926 Subpart CC: signal persons (1926.1428), qualified riggers (1926.1425(c), 1926.1404(r)), signals (1926.1419–1422), training (1926.1430), and rigging equipment (1926.251).
Online and Mobile Access
Study at your own pace on any device and take the final assessment when ready.
Unlimited Exam Retakes
Retake the final assessment as many times as needed at no extra cost.
Instant Certificate of Completion
Available online immediately after you pass, documenting course completion.
What the Online Course Does Not Replace
OSHA places additional responsibilities on employers that online training alone cannot fulfill.
What This Online Course Provides
- Technical knowledge training on rigging equipment, load calculations, sling selection, wire rope, fiber rope, chains, hooks, knots, splices, and rigging hardware
- Standard hand signals for crane operations based on ASME B30.5
- Understanding of OSHA Subpart CC requirements
- A written assessment of your knowledge
- A Certificate of Completion documenting successful course completion
- Five employer handouts: Signal Person Qualification Record, Hand Signal Reference Chart (ASME B30.5), Non-Standard Hand Signal Agreement, Rigging Equipment Inspection Log (daily/shift), and Alloy Steel Chain Sling Periodic Inspection Record (12-month)
What the Employer Must Still Provide
- Signal persons: a practical test in addition to the written or oral test, assessment by a qualified evaluator (third-party or employer's), and worksite documentation of each type of signaling the person is qualified for
- Qualified riggers: a job- and equipment-specific determination that you meet qualified-person criteria and can solve rigging-load problems for the particular job
- Site-specific and equipment-specific training
- Hands-on demonstration and evaluation
- Workplace hazard identification
- Refresher training when indicated by performance or evaluation
Completing this course provides the knowledge foundation, but does not by itself create signal person qualification or qualified rigger status. Your employer makes those determinations.
Trusted by safety professionals.
“The sling angle and load calculation lessons finally made the math click before my practical evaluation.”
Questions, answered.
Still unsure if this course is right for you or your team? Reach out to our team.
Reach OutRigger & Signal Person Training Today.
Build the knowledge foundation for signal person qualification and qualified rigger roles — rigging equipment, load calculations, sling selection, rope, hardware, and standard hand signals.
