Scissor Lift Online Training
Online knowledge training for construction and general industry workers who use mobile elevated work platforms — hazard recognition, pre-operation inspection, rated capacity, fall protection, and safe operating procedures based on federal OSHA and ANSI consensus standards.
- Unlimited exam retakes
- Mobile access on any device
- Certificate available immediately after passing
- Group and business enrollment available
- 4 employer handouts included
Master the Knowledge to Operate Scissor Lifts Safely
Scissor lifts create serious fall, crush, and electrocution hazards. OSHA requires workers to be trained to recognize these hazards and follow procedures that minimize risk. This course provides the foundational knowledge training required under 29 CFR 1926.454.
You’ll learn inspections, rated capacity, stability, fall protection, safe positioning, and overhead and environmental hazards — with employer handouts to document training and support compliance.
Hazard Recognition & Safe Work Practices
Falls from elevation, tip-overs, struck-by hazards, and electrocution from overhead power lines.
Pre-Operation Inspection
Why every shift starts with an inspection, what to check before raising the platform, and how to respond to a defect or unsafe condition.
Rated Capacity & Stability
Calculating total platform load, height-to-base-width ratio, and using outriggers and wheel locks to stay stable.
Fall Protection & Guardrails
When guardrails are required, what makes a compliant system, and when personal fall arrest systems must also be used.
Workers and Supervisors Who Use Scissor Lifts
The online knowledge portion of OSHA-required training for workers in construction, maintenance, warehousing, and facilities management.
Framing, installation, finishing, or maintenance tasks on construction sites.
Routine maintenance, HVAC, electrical work, or equipment service at height.
Accessing inventory, stocking, or inspections in warehouses and distribution centers.
Building maintenance, lighting replacement, signage, and general upkeep at height.
Painting, finishing, or surface prep on walls, ceilings, and elevated surfaces.
Personnel who oversee scissor lift operators and need to understand OSHA requirements.
Training Based on Federal OSHA and ANSI Standards
This course covers the training topics required under 29 CFR 1926.454 for employees exposed to fall hazards on scaffolds and aerial lifts, and is aligned with ANSI A92.20 and A92.24, the industry consensus standards for mobile elevated work platforms. Based on federal OSHA; State Plans may have additional requirements.
Important: this course is the knowledge portion only. Employers must also provide hands-on training, evaluate each worker on the specific equipment, and address site-specific hazards before authorizing independent operation.
Federal OSHA 29 CFR 1926.454
Based on the OSHA Construction standard requiring training for each employee who erects, disassembles, moves, operates, or works from scaffolds and aerial lifts.
Mobile and Online Access
Complete the training at your own pace from any device with internet access.
Unlimited Exam Retakes
Retake the final assessment as many times as needed at no additional cost.
Instant Certificate of Completion
Available online immediately after you pass — no waiting or mailing delays.
What the Online Course Does Not Replace
Federal OSHA requires employers to provide more than online training alone.
What This Online Course Provides
- Knowledge training on scissor lift hazards, inspection, operation, rated capacity, fall protection, and OSHA requirements
- Coverage of the training topics required under 29 CFR 1926.454, aligned with ANSI A92.20 and A92.24
- A final assessment with unlimited retakes
- A Certificate of Completion available immediately after passing
- Four employer handouts: Daily Scissor Lift Inspection Log (Competent Person), Competent Person Designation Form (Scissor Lift Inspections), Scissor Lift Operator Training Record, and Unit Capacity Reference Card (Per Scissor Lift)
What the Employer Must Still Provide
- Hands-on training on the specific make and model of scissor lift the employee will operate
- Site-specific instruction on workplace hazards, terrain conditions, overhead obstructions, and emergency procedures
- Practical evaluation to verify the employee can operate the equipment safely before authorizing independent use
- Competent person involvement to conduct or oversee the training program and ensure the employee has the necessary knowledge and skill
Use this course as the classroom or knowledge portion of a complete program that also includes equipment-specific and workplace-specific instruction and hands-on evaluation. The Certificate of Completion is not an OSHA certification, a competent person designation, or employer authorization to operate.
Trusted by safety professionals.
“The inspection and rated capacity lessons were clear and practical. I use that pre-shift checklist every day now.”
Questions, answered.
Still unsure if this course is right for you or your team? Reach out to our team.
Reach OutScissor Lift Training Online in 90 Minutes.
Gain the foundational knowledge to recognize hazards, inspect equipment, and operate scissor lifts safely — with instant access, unlimited retakes, and an immediate Certificate of Completion.
